1. Introduction
The filter housings are designed in accordance with international regulations.
They consist of a filter housing with a screw-on cover plate.
The filter has good permeability, high precision, excellent strength and ductility.
Standard equipment:
With bypass valve
Connection for a clogging indicator
2. Filter Material
It can be made of BN4HC, AM, BN/AM, paper, stainless steel metal net and stainless steel metal fiber.
We also can provide other kind of material if you required.
3. Application
It can be used for mineral oils, lubrication oils, non-flam fluids, synthetic and rapidly biodegradable fluids.
4. Filter Specification
|
Norminal pressure
|
SD RF 30,2500 TO 15000: 10 bar
SD RF 60 to 1300: 25 bar
|
|
Temperature range
|
-10~100 centigrade |
|
Material of filter housing and cover plate
|
SD RF 30: PA 66
SD RF 60 to 330: Aluminium
SD RF 660 to 1300: EN-GJS-400-15
SD RF 2500 to 15000: Welded steel
|
|
Type of clogging indicator
|
VR connection thread G1/2 ( return lind indicator up to 25 bar operating pressure |
|
Pressure setting of clogging indicator
|
2 bar ( others on request ) |
|
Bypass cracking pressure
|
3bar ( others on request ) |
|
Seals
|
NBR (= Perbunan) |
|
Mounting
|
As tank-top or inline filter |
4. Important information:
a. Filter housings must be earthed.
b. When using electrical clogging indicator, the electrical power supply to the system must be switched off before removing the clogging indicator connector.
5.Type of clogging indicator:
a. plastic blanking plug in clogging indicator port
b. steel blanking plug in clogging indicator port
c. visual clogging indicator
d. electrical clogging indicator
e. visual and electrical clogging indicator
